2024 Bell 407GXi Turbine Helicopter For Sale

Factory New 2024 – Bell 407GXi, S/N 56398, R/N to be determined. Production & delivery flight time only. Factory Warranty – 1,000 hours or three years. Delivery – June 2024.

Type:
Helicopter (Turbine)
Manufacturer:
Bell
Model:
407GXi
Year:
2024
Serial Number:
56398
Reg. Number:
To Be Determined
Total Time:
Delivery Only
Seats:
7
Price:
Price Upon Request

Filters Sort results
Reset Apply
Price:
Enquire
Aircraft Type:
Aircraft Model & Manufacturer:
Year:
2024
Total Time:
Not Listed
Registration Number:
Not Listed
Serial Number:
56398
Seats:
7
Aircraft Location:
Contact Name:
Grant Edwards
  MESSAGE SELLER

Categories:

Description

Engine
Rolls Royce 250-C47E/4, 862 SHP
Dual FADEC (Full Authority Digital Engine Control)

Interior
Corporate Smokey Gray all leather seats, paired with High Visibility Windows & Executive Soundproofing.

Exterior
Custom 429 scheme. White base with Charcoal trim and Gray accents. Registration in Vinyl Letters, ready for Custom Registration
Number.

Customizing
Customized changes to this configuration may be possible subject to factory selection deadlines. Changes may affect price and delivery schedule. Inquire for more details.

Factory Standard Baseline
Glass Cockpit – G1000H NXi (Garmin)
Garmin GTX 335R w/ES Mode S Transponder
Rotor Brake
Dual Controls
28 Amps Battery
M/R Blades – High Vis
Aux Fuel Tank Provisions
Wire Strike Protection System
Tail Rotor Camera
LED Lighting (Interior/Exterior)
5250 lbs Max Gross Weight
Rubber Mounted Chin Bubbles (AA)
Precise Flight Pulse Landing Light
High Skid Gear -w- Flitesteps

Customized Kits Config A
Autopilot – 2-Axis AFCS
Radar Altimeter – GRA 55
High Visibility Crew Door Kit (Light Gray)
High Visibility Cabin Window Kit (Dark Gray)
Inlet Barrier Filter w/Access Door
Bleed Air Heater
Windshield & Chin Bubble Defrost
Air Conditioner -w- Dual Forward Evaporators
Headliner -w- AC Ducting
Corporate Interior Trim Kit & Soundproofing
Corporate Passenger & Crew Seats
Crew Assist Handles
Center Map Pocket – Leather
Flight Manual Pocket – Leather
Fuel Filler Protector
Expanded Avionics Shelf
Pre-Flight Kit Includes (4) Step Handles (2) Folding Maintenance Steps

Continued Customized Kits Config B
MD-302 Standby Digital Attitude Module
Weather Data Link – GDL-69HA
XM Weather and Satellite Radio
Traffic Avoidance System – GTS 800 TAS
Artex C406-NHM ELT with PBM Adaptor
Aux Fuel Tank – 19 Gallon
USB Ports cockpit & pax cabin
Combination LED Strobe/Position Lights
Baggage Extender Spacemaker & Cover
Cockpit, Cabin, & Baggage Floor Protectors
Baggage Compartment Edge Protector
7 Place VOX Intercom
LEMO Headset Jacks (7 place)
Copilot Tail Rotor Pedal Safety Kit
Pneumatic Door Openers, Cabin/Baggage Doors
6 Bose A30 Noise Cancelling Headsets w- Bluetooth Cell phone connectivity

Garmin G1000H® Nxi According to Bell Product Specifications
The Garmin G1000H® NXi Integrated Avionics System in the Bell 407GXi has been designed to improve situational awareness and reduce pilot workload through easy to read displays of critical flight information, tuning of communication and navigation frequencies, and simple flight planning management. The Bell 407GXi’s standard configuration G1000H® NXi includes the Synthetic Vision System (SVS) and initial installation of the HTAWS and Navigation database [1]. The system has two SD card slots to facilitate data Input/Output tasks such as flight plan and database uploading or critical flight data downloads. The system takes advantage of the latest in display, computer processing, and digital data bus technology to provide a high degree of redundancy, reliability, and flexibility.

The main components of the Garmin G1000H® NXi
Two 10.4” (26.4 cm) GDU 1050H high-definition LCD displays (interchangeable PFD/MFD)
Two GIA 64H Integrated Avionic Units, including:
• GPS / WAAS Receiver
• VHF COM Transceiver
• VHF NAV and Glideslope Receivers
• Aural Alert Generation
GEA 71HB Engine and Airframe Unit (signal processing of engine parameters and major system sensors)
GSU 75 Air Data and Attitude Heading Reference System and GMU 44 Magnetometer
GMA 350Hc Audio System [2]
GTX 335R Extended Squitter (ES) Mode S Transponder
MD-302 Digital Standby Module

Notes: [1] Database subscription updates are the responsibility of the helicopter owner/operator. [2] Integrated Marker Beacon Receiver capability is available with customizing of a Marker Beacon Antenna, and 3D Audio capability is available with customizing of stereo headsets.

BELL 407GXi Autopilot Kit (Reference Bell Product Specifications)
The optional 2-axis autopilot is a Bell 407GXi specific kit. It features greater capabilities at a lower cost and is the only kit that is fully-integrated with the
Garmin G1000H avionics suite to display autopilot modes, hold references, audio alerts and CAS messages. This kit provides enhanced lateral and longitudinal stability in low-speed flight and a cyclic force trim release switch, a beep reference switch, pitch/roll/yaw hands-on stability augmentation, and pilot-initiated automatic recovery.

EXECUTIVE SEATING AND INTERIOR TRIM (According to Bell Product Specifications)
The executive cabin seating consists of five ‘overstuffed style’ seats with individual seat belts and single strap a shoulder harnesses, arranged with two extra wide forward facing outboard seats and middle seat for occasional use across the rear of the cabin (with a fold down arm rest between the outboard seats) and two individual rearward facing seats aft of the cockpit. The executive interior trim consists of full plastic closeouts on all airframe areas, fabric covered outboard headliner blankets, and armrests covered with color coordinated leather. The flooring is 100% wool cut pile carpet.