Spirit 160 Direct Redline Aeronautical Engine By MWfly

Spirit 160 Direct Redline Aeronautical Engine

4 cylinder boxer, Liquid with mechanical pump cooling system, Gear + chain with automatic chain tensioner timing driving system, Max Power 160hp, Motor can be ordered with clockwise or anticlockwise rotation.

Filters Sort results
Reset Apply
Seller:
  MESSAGE SELLER

Location:

Description

Engine Data
Model – SPIRIT 160 DIRECT R/L
Type – 4 cylinder boxer
Displacement [cm3 (in3)] – 2545 (155)
Weight [Kg (lbs)] – 81 (178) dry (without accessories)
Dimension L x W x H [mm (in)] – 590 x 762 x 419 (23.23 x 30 x 16.5)
Stroke X Bore [mm (in)] – 81 x 100 (3.18 x 3.93)
Compression Rate – 10.1 ÷ 1
Thermodynamic Cycle – 4 stroke fuel (Otto cycle)
Fuel – Mo.GAS min. AKI 90, R.O.N. 95, M.O.N. 85, LL100
Cooling System – Liquid with mechanical pump
Lubrication – Semi-dry sump, pressure oil feed assisted with internal pump
Timing System – 2 valves per cylinder with S.O.H.C. (Single Over Head Camshaft)
Timing Driving System – Gear + chain with automatic chain tensioner

Transmission
Type – Direct drive
Transmission Ratio – 1 ÷ 1
Max Propeller Speed [rpm] – 4750
Propeller Rotation – Right (R) or Left (L)
Damper – Active Damping Control (A.D.C.)

Electric Data
Generator – Permanent magnet, oil cooled, 225W (12.5V-18A)
Starter – Electric 0.65kW with anti-kickback clutch
F.R.I.S. (Full Redundancy Injection System) – ECU with dual injection & ignition; altitude & temperature compensation; Limp Home strategy

Performance
Max Power [Hp (kW)] – 160 (117.7) @ 4650 rpm
Max Torque [Nm (Ft-lb)] – 260 (192) @ 3750 rpm
Max Continuous Power [Hp (kW)] – 142 (104.4)
Max Engine Speed [rpm] – 4750
Power/Weight [Hp/Kg (Hp/lbs)] – 1.97 (0.90)
Fuel Cons. [L/h (USgal/h)] – 34.2 (9.03) @ 120 Hp (75%)
TBO [h] – 1200

Dimensions & Weight
Weight [Kg (lbs)] – 81 (178) dry (without accessories)
Dimension L x W x H [mm (in)] – 590 x 762 x 419 (23.23 x 30 x 16.5)

Fuel Consumption
Fuel Cons. [L/h (USgal/h)] – 34.2 (9.03) @ 120 Hp (75%)

Accessories
EX-m
EXhaust module
The kit includes:
Stainless steel muffler
4x exhaust stainless steel manifolds
6x fixing springs
4x gaskets
Corresponding mounting hardware
Can be fitted on all engine versions, tractor or pushing configuration.
Total weight 5850 grams